
Jump to Section
Chinese Shoe Size Converter
Enter your measured foot length, a common Chinese seller size or your usual US size. The converter shows the closest reference size for men or women.
Approximate conversion only. CN labels, box CM values, foot length and insole length are not always interchangeable. Check the specific brand or supplier size chart before ordering.
Chinese shoe sizes can appear as millimeter-based numbers such as 240, 250 and 260, or as European-style numbers such as 38, 40 and 42. These labels are not always used consistently by Chinese brands and factories.
As a general reference, a shoe labeled CN 42 is commonly close to a US men's 8-8.5 or a US women's 9.5-10. However, the safest way to choose a size is to compare your measured foot length with the specific brand or supplier's size chart.
Use the converter and charts below as a starting point, not as a replacement for the manufacturer's measurements.
What Is a Chinese Shoe Size in US Terms?
A Chinese shoe size may be shown as a millimeter-based label, such as 240, 250 or 260, or as a European-style number, such as 38, 40 or 42.
These labels do not always have one guaranteed US equivalent. For example, CN 42 is commonly listed around US men's 8-8.5, but the result can vary by brand, shoe last and the measurement method used by the seller.
Before converting a CN size, check whether the product chart is showing:
• Recommended foot length;
• Insole length;
• A regional shoe-box label;
• An older Chinese size number;
• A factory-specific size.
Quick reference:
• CN 240: commonly around US men's 6-6.5 or US women's 7-7.5;
• CN 250: commonly around US men's 7-7.5 or US women's 8-8.5;
• CN 260: commonly around US men's 8-8.5 or US women's 9-9.5;
• CN 270: commonly around US men's 9.5-10 or US women's 10.5-11.
These are approximate ranges. Follow the specific brand or supplier chart whenever one is available.
How Does the Chinese Shoe Size System Actually Work?
There is no single label format used by every Chinese shoe brand, factory or marketplace seller.
1. Millimeter-based labels
Numbers such as 240, 245, 250 and 260 are commonly associated with length-based sizing. They may indicate the foot dimensions the shoe is intended to fit, but the number printed on a box should not automatically be treated as the wearer's exact heel-to-toe measurement.
2. European-style Chinese labels
Many Chinese sellers use numbers such as 38, 39, 40, 41 and 42. These numbers resemble EU sizes, but the seller may be using an older Chinese scale, an EU scale or a factory-specific mapping.
3. Factory-specific size charts
Private-label manufacturers often build a size chart around their own shoe last. Two factories can therefore label similar-looking shoes differently.
The ISO Mondopoint system is based on defined foot measurements. However, shoppers should still confirm how the individual brand or supplier has applied its labels.
Chinese Shoe Size to US Chart — Men
The chart below gives approximate equivalents for common Chinese seller labels. Because brands and factories use different shoe lasts and grading rules, use the product-specific foot-length chart whenever it is available.
Seller label | Typical reference | Approx. US Men | Note |
CN 38 | 235-240 mm | 5.5-6.5 | Approximate only |
CN 39 | 240-245 mm | 6-7 | Check brand chart |
CN 40 | 245-250 mm | 6.5-7.5 | Check foot length |
CN 41 | 250-255 mm | 7-8 | May vary by last |
CN 42 | 255-260 mm | 8-8.5 | Common search |
CN 43 | 260-265 mm | 8.5-9.5 | May vary by brand |
CN 44 | 265-270 mm | 9-10 | Check width |
CN 45 | 270-275 mm | 9.5-10.5 | Approximate only |
CN 46 | 275-280 mm | 10.5-11 | Check brand chart |
CN 47 | 280-285 mm | 11-12 | Check foot length |
CN 48 | 285-290 mm | 12-12.5 | Approximate only |
CN 42 is commonly close to US men's 8-8.5, but some suppliers map it differently. Ask for the recommended foot length when the seller only provides a CN number.
Chinese Shoe Size to US Chart — Women
Women's US sizing uses a different number scale from men's sizing. Use a women's chart and confirm the shoe's recommended foot length, width and toe shape.
Seller label | Typical reference | Approx. US Women |
CN 34 | 215-220 mm | 4.5-5.5 |
CN 35 | 220-225 mm | 5-6 |
CN 36 | 225-230 mm | 5.5-6.5 |
CN 37 | 230-235 mm | 6-7 |
CN 38 | 235-240 mm | 6.5-7.5 |
CN 39 | 240-245 mm | 7-8 |
CN 40 | 245-250 mm | 7.5-8.5 |
CN 41 | 250-255 mm | 8.5-9 |
CN 42 | 255-260 mm | 9-9.5 |
CN 43 | 260-265 mm | 9.5-10.5 |
CN 44 | 265-270 mm | 10.5-11 |
CN 45 | 270-275 mm | 11-11.5 |
A seller's CN 240 is commonly around US women's 7-7.5, but the shoe-box label may not equal the wearer's exact foot length.The same physical shoe can be labeled US men's 6 — which is why the same box sometimes shows two different US numbers.
How Do You Convert Kids' Chinese Shoe Sizes to US?
Children's shoe sizing should be based on measured foot length rather than age. Two children of the same age can have very different foot measurements.
Measure both feet and use the longer measurement. Then compare that result with the individual brand or supplier's children's chart.
A useful children's size chart should identify:
• Heel-to-toe foot length;
• Whether the US size is infant, child or youth;
• The recommended fitting allowance;
• Insole length, if provided;
• EU and CN labels;
• Whether the shoe is designed for narrow, standard or wide feet.
Because children's US sizing uses different infant, child and youth scales, do not apply an adult conversion formula.
For a complete baby, toddler, child and youth table, see our Chinese Kids' Shoe Size to US Guide.
How Do I Measure My Foot Length Correctly?
Every reliable conversion starts from your measured foot length in millimeters — not the US size you "usually" wear. A reliable conversion starts with measured heel-to-toe foot length rather than only the US size you usually wear. Here's the 30-second method I use before every online order:
- Place a sheet of paper flat against a wall on the floor.
- Stand on it with your heel lightly touching the wall, weight even.
- Mark your longest toe — it isn't always the big toe.
- Measure from the wall to the mark in millimeters.
- Do both feet and use the longer one.
Two tips that matter: measure in the evening, when your feet are slightly larger, and wear the socks you'll actually use with the shoes. Use the longer foot measurement and compare it with the manufacturer's recommended foot-length range. Do not assume that the number printed on the box is identical to the measured foot length. This is the same approach the sizing standard endorses — Mondopoint lends itself directly to shoppers measuring and reporting their own foot length, which is why online and mail-order customers are commonly encouraged to do it.
Is Chinese Shoe Size the Same as European?
No — they're close but not identical. The old CN numbers (38, 39, 40…) look like EU numbers, but they're built on different measuring units, so they drift apart at the extremes.
- EU sizing uses the Paris Point: one size = 6.67mm, with no separate men's and women's numbering.
- CN Mondopoint uses direct foot length in millimeters.
A CN 42 is roughly an EU 42 in the middle of the range, but by the time you reach CN 46–47 the gap can grow to a full size. As the American National Standards Institute explains, these different starting points are why the same foot length ends up with different size designations, and a US size will often be slightly larger than the corresponding European size. When in doubt, match on foot length, not on the assumption that CN = EU.
Why Do People Say Chinese Shoes Run Small?

Some shoes purchased from Chinese sellers feel smaller than expected, but the cause is not always the country of manufacture.
Common causes include:
• The buyer converted from their usual US size instead of measuring their foot;
• The seller used a CN or EU-style label without explaining the recommended foot length;
• The shoe has a narrow toe box or slim shoe last;
• The chart lists insole length rather than foot length;
• The factory uses a different grading rule from the buyer's usual brand;
• The shoe category requires a different fit.
Do not automatically increase every Chinese shoe by one full size. First compare your measured foot length with the product-specific chart. If you are between sizes, have wide feet or plan to wear thick socks, review the seller's fit guidance before choosing the larger option.
How Should Importers Plan a Size Run for a Bulk Shoe Order?
A size run is the number of pairs you order in each size. Most orders put the largest share in the middle sizes and fewer pairs at each end.
Here is an example for a 1,200-pair men's sneaker order in US 7–12, using a 1-2-3-3-2-1 ratio:
US men | Ratio | Pairs |
|---|---|---|
7 | 1 | 100 |
8 | 2 | 200 |
9 | 3 | 300 |
10 | 3 | 300 |
11 | 2 | 200 |
12 | 1 | 100 |
This ratio is an example only. Base your own run on sales data from your market.
Also decide how pairs go into cartons:
- Solid pack: one size per carton. Easier for warehouses that store by size.
- Assorted pack: several sizes per carton in your ratio. Easier for retailers that receive one carton per store.
What Size Specs Should You Get from a Chinese Shoe Factory?
A general conversion chart is not enough for a production order. Ask the factory for a size specification that covers every size you order.
Spec | Why it matters | What to ask for |
|---|---|---|
Foot length per size | The base for every label | Millimeters for each size |
Insole length | Shows the real space inside the shoe | Millimeters, measured on the sample |
Last code and last length | The last decides the fit | Last number and bottom length |
Ball girth or width | Controls width fit | Girth in mm; US standard widths are D for men and B for women |
Grading interval | The step between sizes | Confirm 5 mm (CN) or 1/3 inch (US) |
Put these values into your purchase order. Our guide on how to create a product specification sheet shows how to write measurable requirements. For new designs, see our product design service.
How Do You Check Shoe Sizes on Samples and Before Shipment?

Size errors are cheap to fix at the sample stage and expensive after shipment. We check sizes at four points.
- Sample stage. Measure the insole length of each sample size and compare it with the spec.
- Approval. Sign the final label mapping and keep one approved pair per size as the reference. Our article on golden sample vs production explains this step.
- During production. Check the first finished pairs in each size before the factory runs the full order.
- Pre-shipment inspection. Measure pairs from each size and match tongue labels, box labels and carton marks.
Most buyers set how many pairs to inspect with the AQL tables in ISO 2859-1. See our quality check service and our pre-shipment quality check guide.
Which Size Labels Should Go on the Shoe and the Carton?

Print every size system your buyers use. A shoe sold in the US, UK and EU usually shows US, UK, EU and CM on the tongue or insole label.
Carton marks should list:
- Style number and color
- Size breakdown and quantity per carton
- Gross and net weight (how to calculate both)
- Country of origin, such as "Made in China", which US Customs requires on imported goods
What Sizing Problems Should You Check For on Export Shoe Orders?
Most sizing complaints on export shoe orders trace back to a few repeat problems. Each one can be caught before the goods leave the factory.
Problem | What the buyer sees | Where to catch it | How to prevent it |
|---|---|---|---|
EU-style numbers on a US order | Shoes arrive about one size off | Sample measurement and label check | One signed US/UK/EU/CM label table |
Insole shorter than the spec | Shoes feel half a size small | Sample stage, measure the insole | Insole length per size and a tolerance in the PO |
Wrong width | Length fits, but the shoe feels tight | Wear test on the approved sample | Ball girth or width (D for men, B for women) in the spec |
Labels do not match | Tongue, box and carton show different sizes | Pre-shipment inspection | Check all three labels for every size |
Wrong ratio in assorted cartons | Stores receive the wrong mix of sizes | Packing check before cartons are sealed | A carton packing list based on your size run |
Half sizes dropped | The factory ships only whole sizes | Purchase order review | Confirm half-size lasts before you place the order |
The fastest check is also the simplest. Measure one approved pair per size and keep it as the reference for every later stage.
Chinese Shoe Size to US: Quick FAQ
What size is 40 in China to US men's?
A CN 40 (250mm foot length) is about a US men's 7, or a US women's 8.5. Always confirm gender first, since the same CN number maps to different US sizes for men and women.
What is Chinese size 42 to US?
A CN 42 (260mm) is a US men's 8 in standard grading — one of the most-searched conversions.
Is CN shoe size the same as EU?
No — close but not identical. CN often uses the millimeter format; EU uses Paris Points (6.67mm per size). A CN 42 ≈ EU 42 mid-range, but the offset grows toward the extremes.
Should I just size up when buying Chinese shoes?
Not blindly. Chinese shoes can run small, but the gap varies by brand and shoe type. Convert from your measured foot length first; then size up if you're between sizes or have wide feet.
How do men's and women's conversions differ?
In US sizing, women's numbers run about 1.5 sizes larger than men's for the same foot (US men's 8 ≈ US women's 9.5). Women's Chinese lasts are also cut narrower.
What's the safest way to avoid a sizing return?
Measure your foot length in cm/mm, match it to the CN column, check fit reviews, and size up when in doubt. Fit drives the vast majority of footwear returns, so getting this one number right solves most of the problem.
Does CN 260 mean a 260 mm foot?
It often refers to a millimeter-based size around that length, but not every brand applies the label in the same way. Confirm whether 260 means recommended foot length, a regional box label or another measurement.
Is foot length the same as insole length?
No. Insole length normally includes additional internal space and is usually longer than the wearer's foot. Ask the seller which measurement appears in the chart.
How should an importer create a US size chart for Chinese-made shoes?
Base the chart on the approved production sample, target foot length, internal dimensions and shoe-last grading. Do not copy a conversion chart from an unrelated supplier.
Buying one pair of shoes requires careful measurement. Ordering hundreds or thousands of pairs requires a complete size-control process. Mutual Trade helps international buyers verify Chinese footwear suppliers, confirm size specifications, inspect samples and check production before shipment. Contact our sourcing team if you need help sourcing private-label shoes or verifying a Chinese footwear manufacturer.
Vincent works in foreign trade at Mutual Trade, a Yiwu-based sourcing company, helping international buyers source and purchase products from China. Through daily work with Chinese factories and overseas customers, he has hands-on experience with product sizing, quality checks, and cross-border shipping. He writes practical guides to help both shoppers and importers buy from China with confidence.